Customization of 3D plots

This command can be accessed by a click on the

Draws only the three axis on the active 3D plot.

This command can be accessed by a click on the

Draws the three axis on the active 3D plot, and a box around it.

This command can be accessed by a click on the

Doesn't draw the three axis nor the box on the active 3D plot.

This command can be accessed by a click on the

Draws a grid on the front panel of the active 3D plot. The position of this grid is the plan defined by y=y_min.

This command can be accessed by a click on the

Draws a grid on the back panel of the active 3D plot. The position of this grid is the plan defined by y=y_max.

This command can be accessed by a click on the

Draws a grid on the left panel of the active 3D plot. The position of this grid is the plan defined by x=x_min.

This command can be accessed by a click on the

Draws a grid on the right panel of the active 3D plot. The position of this grid is the plan defined by x=x_max.

This command can be accessed by a click on the

Draws a grid on the top panel of the active 3D plot. The position of this grid is the plan defined by z=z_max.

This command can be accessed by a click on the

Draws a grid on the floor panel of the active 3D plot. The position of this grid is the plan defined by z=z_min.

This command can be accessed by a click on the

Enables/Disables the 3D perspective mode.

This command can be accessed by a click on the

Resets the rotation of the 3D plot to the default values.

This command can be accessed by a click on the

Finds the best layout of the 3D plot fitting the window size. It readjusts the length of the axis ticks to a default value.

This command can be accessed by a click on the

If the active 3D plot is a 3D histogram, this command is used to modify the style of the bars.

This command can be accessed by a click on the

If the active 3D plot is a 3D scatter, this command is used to modify the style of the data points to dots.

This command can be accessed by a click on the

If the active 3D plot is a 3D scatter, this command is used to modify the style of the data points to cones. It is then possible to modify the drawing parameters of the cones by double clicking on the plotting area.

This command can be accessed by a click on the

If the active 3D plot is a 3D scatter, this command is used to modify the style of the data points to cross-hairs. It it then possible to modify the drawing parameters of the crosses by double clicking on the plotting area.

This command can be accessed by a click on the

If the active 3D plot is a 3D surface, this command is used to modify the style of the surface to a simple wireframe.

This command can be accessed by a click on the

If the active 3D plot is a 3D surface, this command is used to modify the style of the surface to a wireframe. A computation of the hidden line is done.

This command can be accessed by a click on the

If the active 3D plot is a 3D surface, this command is used to modify the style of the surface to polygons.

This command can be accessed by a click on the

If the active 3D plot is a 3D surface, this command is used to modify the style of the surface to polygons with a mesh.

This command can be accessed by a click on the

If the active 3D plot is a 3D surface, this command is used to add a filled area projection of the surface on the floor of the plot.

This command can be accessed by a click on the

If the active 3D plot is a 3D surface, this command is used to add an isoline.

This command can be accessed by a click on the

If the active 3D plot is a 3D surface, this command is used to remove any projection from the floor.

This command can be accessed by a click on the

Enables/disables animation.